Console Accessories

Yamaha MC-802 / MC-1202 / MC-1602 Master Aux2 Switch Cap [USED] Pulled from non-working MC-1202. There are only 2 of these caps on each mixer in the master section. If you need parts for this board, let us know. *NOTE: Image is of one part and not...

Yamaha MC-802 / MC-1202 / MC-1602 Master Aux1 Switch Cap [USED] The Aux1 switch cap is used in the master section for both the aux/cue meter and talkback routing. Pulled from non-working MC-1202. There are only 2 of these caps on each mixer in the...

Yamaha MC-802 / MC-1202 / MC-1602 Channel Auxiliary Knob - Small [USED] Pulled from non-working MC-1202. There are 3 of these on each channel for the aux sends. If you need parts for this board, let us know. *NOTE: Image is of one part and not...

RCA Connector pair

MCI / Sony P&G Penny & Giles Fader Caps - Small - Black [USED]

DANTE DanteTM is a ground breaking, Ethernet compliant audio networking technology developed by Audinate to satisfy the increasing demands of the live sound industry for high performance audio, routing flexibility and affordable direct to computer...

CSB Optical MADI HD card. Available in Multi or Single mode

16 in 16 out XLR AES Card By adding option cards to the Si range of digital consoles, you can interface your desk with a multitude of analogue and digital systems, whilst expanding I/O count beyond that of the standard console configuration. Routing to...

WAVES module for SQ series mixer SQ Waves provides any SQ mixer with a 64×64, 96kHz or 48kHz interface to a Waves SoundGrid network using the I/O Port. Engineers can now fit the Waves card to any SQ mixer for Waves plugin processing, multitrack...

SLink card for SQ series mixers SQ SLink provides engineers with the option to add an additional intelligent SLink port to any SQ console. With the same functionality as the built-in SLink port, the card allows connection to a further 128 inputs and 128...

DTOX-16 I/O connects 8 XLR inputs to a D-sub 25-pin connector and 8 XLR outputs to another D-sub 25-pin connector. The breakout panel supports all interfaces using an analog 25-pin D-sub I/O as well as the following RME interfaces: ADI-8 QS, ADI-8...

16 x XLR Output 2 x D-sub DTOX-16 O connects 16 XLR outputs to two D-sub 25-pin connectors (channels 1-8 and channels 9-16). The breakout panel supports all interfaces using an analog 25-pin D-sub output as well as the following RME interfaces: M-32 DA,...