In-Line Attenuators

This adaptor is designed to add attenuation to a dynamic microphone. Selectable -20 dB, -30 dB, or -40 dB attenuation make it ideal for karaoke, public speaking, and other events during which a single microphone is shared.

The Shure A15TG Tone Generator is a battery-powered 700 Hz signal source used to troubleshoot audio systems by checking microphone lines for correct patching and detecting unusual noise that is present.The output level of the A15TG is approximately -42...

The Shure A15RF reduces interference from AM radio stations that may bleed into microphone lines when using long cables in microphone installations such as suspending choir microphones. The A15RF passes phantom power, and can be used with condenser...

The Shure A15PRS reverses the phase (polarity) of a balanced audio signal. Typical use applications incde correcting polarity reversal caused by a wiring error in a microphone cable; connecting an unbalanced high impedance microphone having the "hot"...

The A15LA is a 50 dB attenuator. Use it to connect a line-level or aux-level output from devices such as mixers, tape recorders, and CD players to a mic-level input. The A15LA input can be connected to either a balanced output or an unbalanced output. If...

The Shure A15HP in-line filter passes mid and high frequencies while reducing low frequencies. The A15HP helps to eliminate electrical and mechanical noise in an audio system such as 60Hz electrical hum from AC power lines, low-frequency rumble caused by...

The Shure A15AS Switchable In-Line Attenuator reduces the level of any balanced microphone or line-level signal by 15, 20, or 25 dB. It is specially suited to reducing the level of a high-output microphone to prevent it from overloading the microphone...

The T50K is a professional impedance matching transformer that allows a low impedance microphone (100-600 Ohms) to be connected to a high impedance input (10k-50k Ohms).A typical application for the T50K would be if one wanted to plug a low impedance...

The Audio-Technica AT8202 Adjustable In-line Attenuator is designed to prevent balanced low-impedance microphones from overloading electronics having low- to mid-impedance inputs in high-SPL applications. The adjustable attenuator is designed to assure...