Mic Bars, Extensions & Holders

SB-HB-1M 1m line, works with the SB-SUR and SB-100 SB-HB-2M 2m line, works with the SB-DT

90 Degree Tube Joiner, allows any two 7/8” tubes to be joined at a 90 degree angle

Modular Stand Mount Adapter Stand Mount Adapter with 5/8”-27 thread. Comes with 3/8-16 European style thread adapter  

Standard Mic Holder

Adjustable Right Angle Mic Holder / SB-AMHRA

adjustable mic holder with precision angle scale. 5 degree markings from +90 to -90 degrees

Blumlein for RCA 44 type ribbon mics / SB-BLRA Spacebar Blumlein configuration allows for holding two figure-8 microphones on the same vertical axis and at a precise 90 degree angle of incidence. Two types of mic holder are available depending on the...

Blumlein for standard large diaphragm mics / SB-BL Spacebar Blumlein configuration allows for holding two figure-8 microphones on the same vertical axis and at a precise 90 degree angle of incidence. Two types of mic holder are available depending on the...

A/B 1 meter bar / SB-100 The AB Stereo microphone technique typically uses two omni-directional microphones spaced apart by a distance. The SB-100 configuration is basically a 1M wide stereo bar. With the addition of another E420 tube and a E418 joiner...

Decca Tree / SB-DT This classic microphone configuration was developed by Decca Records engineers in the 1950s. The Spacebar Decca Tree configuration provides a simple, precise, and easy to set up solution for this technique. The standard Spacebar Decca...

Surround Tree / SB-SUR The SB-SUR system allows for mounting of 5 microphones. In its standard configuration three microphones can be mounted as a “front triplet” and two microphones can be mounted as a rear pair. All microphone...

66cm horizontal bar with precision distance markings