Description
Azden VHF Wireless Mic System with Wireless Handheld Mic
The WHX-PRO is an easy to use and affordable wireless audio system combining the WM/T-PRO handheld transmitter and WR-PRO camera mount receiver.
The WM/T-PRO is a handheld microphone with a built-in transmitter. It transmits on the standard “PRO” frequencies (169.445MHz and 170.245MHz) and is compatible with all PRO Series receivers. The WM/T-PRO has a standby switch to mute audio and a rubberized coating to reduce handling noise. Runs on a single “AA” battery for up to 10 hours of continuous use.
The WR-PRO is a single channel receiver, but has two selectable operating frequencies to choose from (169.445MHz and 170.245MHz) giving the user an option in case one channel has interference. Comes with camera shoe mount and a 3.5mm mono to stereo microphone output cable.
Features
- Single Channel VHF wireless system
- WM/T-PRO Handheld microphone/transmitter
- WR-PRO Camera Mount Receiver
- 2 selectable operating frequencies
- Connects into DSLR camera’s mic input
- Operates in the low-interference VHF band
- Transmit audio up to 300 feet away
Specifications
WM/T-PRO
- TRANSMISSION FREQUENCY: F1: 169.445MHz; F2: 170.245MHz
- ANTENNA: Internal Antenna
- MIC UNIT: Uni Dynamic
- BATTERY: 1.5V (AA) x 1 (not included)
- POWER CONSUMPTION: 100mA
- RF OUTPUT: 10mW
- IMPEDANCE: 8 k ohms
- BATTERY LIFE: 8 to 10 Hours
- DIMENSIONS: 62mm (Ø) x 211 mm – (2.4″ x 8.3″)
- WEIGHT (including battery): 170g (6.0 oz)
WR-PRO
- Reception Frequency: F1: 169.445MHz; F2: 170.245MHz
- Receiver type: Double superheterodyne
- Sensitivity: 2mV @ S/N of 40dB
- Battery: 9V x1 Alkaline (not included)
- Power consumption: 25mA
- Monitor output: 1V @ 30Ω, Modulation frequency: 1kHz, Deviation: +/-7kHz
- Mic output: 8mV w/10kΩ load, Modulation frequency: 1kHz, Deviation: +/-7kHz
- Mic output impedance: 300Ω
- Dimensions: 86(h) x 60(w) x 21.5(d) mm (3.3” x 2.4” x 0.85”)
- Weight w/battery: 128g (4.5oz)
