Description
Very High Output Mid-High Loudspeaker System
The PD764i Precision Directivity™ loudspeaker provides high-impact sound reinforcement at throw distances that are beyond the reach of single-driver designs. A single module produces greater than 104 dB SPL (continuous) at distances of 50 m (165 ft). The PD764i may be used in clusters with other PD family modules or singly as part of a distributed system.
Features
- 60° by 40° Coverage Pattern–symmetrical frontal dimensions allow horizontal or vertical orientation within an array.
- IFS™ Interference Free Summation dual HF driver module eliminates destructive interference and increases output by 6 dB.
- Dual 2432H compression drivers with 3” diaphragms
- Dual CMCD-82H 8” horn loaded cone mid-range drivers provide 6 dB greater output than traditional designs.
- Pattern control maintained to below 400 Hz.
- Co-axial mid / high-frequency module layout improves mid frequency arrayability and minimizes size.
- Integrated rigging system simplifies array design and construction.
Specifications
- Frequency Range (+/-10 dB) 200 Hz to 19.5 kHz
- Frequency Response (+/-3 dB) 230 Hz - 18.5 kHz
- Coverage Pattern 60° x 40°
- Directivity Index 13 dB
- System Sensitivity (1W @ 1m) Passive Mid-High: 110 dB SPL
- Maximum Peak SPL: (Bi-amplified mode) MHF - 142 dB Peak
- Transducer Power Rating (AES) MHF - 400 W (1600 W Peak)
- Crossover Frequencies 1.2 kHz
- DSP Custom DSP for Crown ITHD and IT4x3500HD amplifiers
- Midrange Frequency Driver 2 x JBL CMCD-82H midrange driver with 200 mm (8 in) diameter
- Differential Drive® dual 75 mm (3 in) voice coil
- High Frequency Driver 2 x JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
- Nominal Impedance
- MF: 4 ohms
- HF: 16 ohms
- Enclosure Trapezoidal with Rectangular sides, combination of 18 mm and 16 mm (5/8 in) exterior grade birch plywood
- Enclosure WRC/WRX Version For direct exposure or extreme environments, berglassed with stainless steel hardware
- Grille Black powder coated zinc treated 14 gauge perforated steel with black foam backing
- Grille WRC/WRX Version Three layer grille assy consisting of 16-gauge powder coated S.S., backed with O.C. foam and S.S. mesh
- Input Connector NL4 for bi-amp operation
- Input Connectors WRC/WRX Version 4 conductor 16 awg direct burial cable assy 20ft length
- WRC/WRX Environmental Specifications IP55
- Suspension Attachment 52 total points (12 top and bottom, 11 each side, 6 back), M10 threaded hardware
- Dimensions (H x W x D) 991 mm x 991 mm x 1145.8 mm (39.0 x 39.0 x 45.1 in)
- Net Weight 215 lbs (97.7 kg)