Description
ROADBUDDY 10 HS B5
Battery Powered Bluetooth Speaker with Mixer, Bodypack and Headset
- Battery-powered speaker solution
- Integrated radio receiver 584 - 607 MHz
- Bluetooth player with USB port and SD card slot
- Class D power amplifier with 480 watts of peak power
- 2 combo sockets for microphone or line inputs
- 3.5 mm Aux input
- Master section with 2-band EQ
- Built-in wheels, pull-out handle and fixing for 35 mm tripod mount
- Wireless microphone and IR-remote control included
The LD Systems Roadbuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10" custom woofer and a 1" compression driver is operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peak power.
The Roadbuddy relies fully on wireless transmission: it has an UHF radio receiver which operates in the 584 -607 MHz range, and can be expanded with an additional system. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. A handheld microphone with 10 mW output power(LDRBUD10B5) or as an alternative a headset microphone with belt pack (LDRBUD10HSB5) and an IR-remote control for the player are included.
For wired devices, the Roadbuddy has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input via RCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel.
The LD Systems Roadbuddy is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to two hand-held transmitter microphones. The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.
Specifications
General
- Product type Battery-powered PA speaker
- Low/mid Woofer dimensions 10 "
- Woofer dimensions (mm) 254 mm
- Woofer magnet Ferrite
- Woofer brand Custom-made
- HF driver dimensions 1 "
- HF driver dimention (mm) 25.4 mm
- HF driver magnet Ferrite
- HF driver brand Custom-made
- Amplifier Class D
- RMS 120 W
- Peak power 480 W
- Frequency response 55 - 18000
- SPL (1W/1m) 96 dB
- Max. SPL 115 dB
- Protection circuits over-current, overload protection, Short circuit
- Controls AUX / MP3 switch, CD / Tape IN Level, Echo, high, low, Master Volume, Mic 1 Level, Mic 2 Level, Total volume
- Indicators Charge/battery status, Power
Media player
- Supported media Bluetooth, SD Card, USB stick
- Supported formats MP3 file, WAV-CD, WMA file
- Media player controls equalizer, Mode (Menu / Bluetooth /SD / USB), Next Track, Play / Pause, Previous Track, Repeat, Stop
- Media player display elements Lighted multifunctional LC display
- Line inputs 1
- Line input connectors 2 x RCA, 2 x XLR, 3.5 mm jack, 6.3 mm jack
- Mic inputs 2
- Mic inputs 2 x XLR, 6.3 mm jack
Wireless Unit
- Transmission frequency range 584.000 - 607,000 MHz
- Modulation Type FM
- Channels 16
- Frequency Response Wireless Unit 50 - 17000 Hz
- Controllers Wireless Unit ASC, Mute Level (Squelch), Power / Volume, Value Down, Value Up
- Indicators Wireless Unit AF (LED), LED Display, RF (LED)
- Connections Wireless Unit nTNC for receiver antenna
- RF Transmitter Power Output 10 mW
- Bodypack weight 0.08 kg
- Bodypack material ABS plastic
- Power supply Switching power supply
- Operating voltage 100 V - 120 V / 60 Hz, 220 V - 240 V AC / 50 Hz
- Rechargeable batteries 12 V / 5 Ah
- Cabinet material Polypropylene
- Cabinet construction Bass Reflex
- Width 415 mm
- Height 525 mm
- Depth 328 mm
- Weight 16,5 kg
- Other features Stand mount 36 mm, Transport casters, transport handle
