Description
Compact Dante Network Interface
The Radial DiNET DAN-TX is a 2-channel Dante™ transmitter for adding instrument or line level inputs to any Dante system.
Features
| |
More ways than ever to connect over DanteNeed to connect a smartphone, tablet, or any playback device to a Dante network? How about an electric guitar, while still feeding an amp on stage? The DAN-TX can do it all. In fact, with signal handling of up to +24dB, you can connect the line level outputs of a mixing console to the DAN-TX without breaking a sweat. A local level control allows you to adjust as needed, and a number of input connector types ensures you won’t be digging around for an adaptor cable at a critical moment. No matter what source you’re using, the DAN-TX is the easiest way to get your analog audio onto a Dante network. |
DiNET DAN-TX Applications
Using the DAN-TX for mono instrumentsSwitching to instrument mode changes the Right ¼" connector to a Thru-put for connection to a local amplifier. Now your instrument can be routed anywhere on Dante network while still allowing for local monitoring through the stage amplifier. | Using the DAN-TX for stereo instruments or multi-mediaPlug in your stereo keyboards, synths, laptops, tablets or any other unbalanced consumer device and route through the Dante network without installing special software. Simply connect to the ¼", RCA or 3.5mm inputs. | Using the DAN-TX for balanced professional audioSwitching to instrument mode changes the Right ¼" connector to a Thru-put for connection to a local amplifier. Now your instrument can be routed anywhere on Dante network while still allowing for local monitoring through the stage amplifier. |
To meet the requirements of California Proposition 65, it is our responsibility to inform you of the following:
Warning: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Please take proper care when handling and consult local government regulations before discarding.
Specifications
The DiNET DAN-TX is a robust solution for interfacing analog audio gear with a digital Dante-enabled network. Inputs are provided for ¼”, RCA, and 3.5mm connections; so instruments, mobile phones, tables, and professional audio gear can be seamlessly integrated. The DAN-TX handles signal levels up to +24dB, so even the hottest outputs can be used without overloading the device. Side switches allow you to configure the DAN-TX for use with either instruments or line level devices, engage a -20dB pad, or utilize a high-pass filter when needed. 24bit / 96kHz converters ensure the best possible audio quality, and 14-gauge steel construction ensures the DAN-TX will stand up to the toughest touring conditions.
Specifications
- Audio circuit type: High current balanced active input device
- Number of channels: 2
- Frequency response: 20Hz - 20kHz
- Dynamic range: >103dB
- Total harmonic distortion: 0.008% @ -6dBfs
- Intermodulation Distortion: 0.0017% -10dBfs
- Input Impedance: Unbal 240kΩ (20kΩ Line Mode), Bal 40kΩ,
- Noise: -98dB (EIN)
- Noise: 44.1kHz, 48kHz, 88.2kHz, and 96kHz (24bit)
Features
General
- Construction: 14-gauge steel
- Size (L x W x D): 5" x 3.31" x 1.88" (12.7cm x 8.4cm x 4.8cm)
- Weight: 1.45lb (0.66kg)
- Shipping size (L x W x D): 11.75" x 4.75" x 3" (29.8cm x 12.1cm x 7.6cm)
- Shipping weight: 2.1lb (0.95kg)
- Power: 15VDC 400mA (included) or PoE
- Conditions: For use in dry locations only between 5°C and 40°C
- Warranty: Radial 3-year, transferable