Radial Engineering StageBug SB-6 Stereo Isolator

(No reviews yet) Write a Review
SKU:
R800 0160
UPC:
676101040681
Weight:
1.00 LBS
Shipping:
Calculated at Checkout
Availability:
Usually ships within 24 hours
  • Radial Engineering StageBug SB-6 Stereo Isolator
  • Radial Engineering StageBug SB-6 Stereo Isolator
  • Radial Engineering StageBug SB-6 Stereo Isolator
  • Radial Engineering StageBug SB-6 Stereo Isolator
$149.99

Description

Passive Stereo Line Isolator

The StageBug SB-6 is a two-channel passive audio isolator designed to accommodate both balanced and unbalanced signals and effectively eliminate noise when used with instruments, consumer electronics, or professional line-level devices.

Features

  • Isolator for balanced and unbalanced signals
  • Eliminates hum and buzz caused by ground loops
  • Exceptionally linear from 20Hz to 20kHz
  • Automatically configures for hi-Z or lo-Z signal chains

Problem solver for stereo systems

The SB-6 helps remove noise from two channel audio systems, stereo guitar racks, and pedalboards. Two on-board isolation transformers provide a flat frequency response from 20Hz to 20kHz, while removing hum and buzz from ground loops. Dual ground lift switches help further reduce noise, and a -15dB pad allows you to handle high volume outputs without distortion. When using the SB-6 before a set of powered speakers or guitar amplifiers, a polarity reverse switch corrects frequency cancellation and ensures both speakers play back in phase with one another. The SB-6 is completely passive with no need for power, so it's easy to insert into any system to remove noise quickly.

StageBug SB-6 Applications

  • Using the SB-6 in a stereo setup
    • Isolate the output from a DJ Mixer to a power amp using the SB-6 to eliminate hum and buzz caused by ground loops. Either ¼" mono or TRS connectors may be used.
  • Using the SB-6 in a pro setup
    • When running multiple speakers, you can often encounter noise due to imperfect power systems and DC offsets. Use the SB-6 to isolate distant loudspeakers to solve the problem.
  • Using the SB-6 in a guitar rig
    • Eliminate noise in your guitar setup by isolating the guitar amp from other electronic devices. This SB-6 works great between your pedalboard or with your wireless system.
View AllClose

Specifications

The SB-6 is a passive isolator that has been designed to work with both balanced and unbalanced signals. As detailed in the graphs below, the SB-6 is exceptionally linear throughout the audio range and exhibits nearly flawless phase shift even in the lower registers. Very low distortion from -40dB to +10dB makes the SB-6 ideally suited for instruments, consumer audio devices and pro-balanced audio signals, while the compact size makes it easy to integrate in just about any situation.

  • Audio circuit type: Passive Transformers
  • Transformer: Eclipse Custom
  • Frequency response: 20Hz-20KHz +/-1db
  • Dynamic range: >140db
  • Gain: -2dB
  • Total harmonic distortion: <0.0008% @ 1kHz
  • Phase Deviation: >5° @ 30Hz
  • Input Impedance: Varies with Load/47K
  • Output Impedance: 600Ω
  • Maximum Input: >+25dBu

Features

  • Input pad, 180° polarity reverse, Ground lift
  • Input Connectors: 1/4" TRS
  • Output Connectors: 1/4" TRS

General

  • Construction: 14 gauge steel chassis & outer shell
  • Size (L x W x D): 3.92" x 2.54" x 1.7" (100mm x 65mm x 43mm)
  • Weight: 0.9 lbs (408 grams)
  • Shipping size (L x W x D): 8" x 5" x 3" (203mm x 127mm x 76mm)
  • Shipping weight: 1.0 lbs (453 grams)
  • Power: Passive, no power required
  • Conditions: For use in dry locations only between 5°C and 40°C
  • Warranty: Radial 3-year, transferable
View AllClose

Additional Information

WARNING:
Cancer and Reproductive Harm www.P65Warnings.ca.gov
View AllClose

0 Reviews

View AllClose