Radial Tonebone Shotgun 4 Channel Amp Driver

(No reviews yet) Write a Review
SKU:
R800 7215
UPC:
676101044191
Weight:
1.40 LBS
Shipping:
Calculated at Checkout
Availability:
Usually ships within 24 hours.
  • Radial Engineering Tonebone Shotgun 4 Channel Amp Driver
  • Radial Engineering Tonebone Shotgun 4 Channel Amp Driver - Top View
  • Radial Engineering Tonebone Shotgun 4 Channel Amp Driver - Ins & Outs
  • Radial Engineering Tonebone Shotgun 4 Channel Amp Driver - Side
  • Radial Engineering Tonebone Shotgun 4 Channel Amp Driver - Open
  • Using the Shotgun in 2x2 stereo-mode
  • Using the Shotgun in the studio
  • Using the Shotgun in 1x4 mono-mode
$219.99

Description

Four Output Guitar Amp Driver

The Shotgun™ is a compact guitar-level signal buffer designed to drive up to four amplifiers simultaneously while fitting easily on any pedalboard.

Features

  • 1×4 mono or 2×2 stereo operation
  • Isolated outputs eliminate buzz and hum
  • Buffered outputs prevent signal loss
  • 180° polarity switches to phase-match amps

Feed four amps in mono or stereo

The Shotgun makes it easy to drive multiple amplifiers cleanly and in phase without buzz or hum from ground loops. In mono operation, connect to input-1 of the Shotgun and you can feed up to four amps simultaneously. For stereo setups, the Shotgun automatically reconfigures when both inputs are used; feeding input-1 to the first two amplifiers, and input-2 to the second pair. Isolation transformers and ground lifts are included on the outputs to eliminate ground loop noise, along with 180° polarity reverse switches to ensure all amps are phase-matched.

Shotgun Applications

  • Using the Shotgun in 1x4 mono-mode
    • The Shotgun gives you total freedom to connect your pedalboard output to amps, effects or the PA. The isolated outputs eliminate nasty ground loop hum.
  • Using the Shotgun in 2x2 stereo-mode
    • Plug in your stereo chorus and the Shotgun delivers a noise-free stereo signal as it automatically rebalances the load to retain your tone.
  • Using the Shotgun in the studio
    • Use the Shotgun to split your guitar signal to various effects, amps and a direct box so that you can Reamp your guitar solo later on.
View AllClose

Specifications

The Shotgun is a multi-output unity-gain buffering amplifier designed to faithfully reproduce high impedance electric guitar signals and distribute them to four outputs. The first output is direct, while the other three are transformer isolated in order to reduce ground noise contamination. Intended for use with guitars with a working range of between -30dB and 0dB, the Shotgun exhibits less than 0.01% distortion while delivering a near perfect linear frequency response from 20Hz to 20kHz.

  • Audio circuit type: Buffered signal distribution with 3 isolated outputs
  • Frequency response: 20Hz ~ 20kHz
  • Dynamic range: 92dB
  • Gain: 0dB/-0.2dB
  • Clip Level: +4dBu
  • Total harmonic distortion: <0.02% @ -20dB
  • Intermodulation Distortion: ~0.02%
  • Input Impedance: 220K Ω
  • Output Impedance: 1.8K Ω
  • Equivalent Input Noise: -90dBu
  • Noise: -86dBu
  • Maximum Input: +8dBu

Features

  • Ground lift, Phase Adjustment

General

  • Construction: 14-gauge steel chassis and outer shell
  • Size (L x W x D): 4.5" x 3.5" x 1.37" (114 x 92 x 35mm)
  • Weight: 1.1lb (0.5kg)
  • Shipping size (L x W x D): 6.38" x 4.25" x 3" (162 x 108 x 76mm)
  • Shipping weight: 1.4lb (0.63kg)
  • Power: 9 VDC - 25mA, center negative
  • Conditions: For use in dry locations only between 5°C and 40°C
  • Warranty: Radial 3-year, transferable
View AllClose

Additional Information

WARNING:
Cancer and Reproductive Harm www.P65Warnings.ca.gov
View AllClose

0 Reviews

View AllClose