Description
AXT600
Axient Spectrum Manager
Axient Spectrum Manager delivers wide-band UHF spectrum scanning, spectrum analysis, and compatible frequency coordination in a single rack unit.
FEATURES
- Scans and analyzes the global UHF spectrum (470-952 MHz) in approximately one minute
- Continuously monitors, evaluates, and displays backup frequencies in real time
- Enables powerful RF protection features such as series automatic interference detection and avoidance via ShowLink™
- Compatible with Axient Digital and other Shure networked wireless systems, and works seamlessly with Wireless Workbench Software
- Easily connects to your computer or ShowLink Access Point via two Ethernet ports
- IEC in/out power ports enable daisy-chaining of AC power
Specifications
- RF Tuning Frequency Range 470–865, 925–952 MHz
- RF Tuning Step Size 25, 200, 1000 kHz
- Noise Floor
- Resolution Bandwidth
- 25 kHz: -110 dBm
- 200 kHz: -100 dBm
- 1000 kHz: -90 dBm
- Image Rejection >110 dB, typical
- Spurious Response <-100 dBm, typical
- Ultimate Quieting >90 dB, A-Weighted
- Dimensions 44 mm x 483 mm x 366 mm (1.7 in. x 19.0 in. x 14.4 in.), H x W x D
- Weight 5.5 kg (12.0 lbs)
- Housing Steel; Extruded aluminum
- Power Requirements 100 to 240 V AC, 50-60 Hz
- Current Drain 0.8 A RMS (referenced at 120 V AC)
- Operating Temperature Range -18°C (0°F) to 63°C (145°F)
RF Input
- Connector Type BNC
- Configuration Unbalanced, active
- Maximum Input Level -20 dBm
- Impedance 50 Ω
- Bias Voltage 12 V DC, 150 mA (300 mA maximum)
Cascade Output
- Connector Type BNC
- Configuration Unbalanced, active
- Impedance 50 Ω
- Insertion Loss <5 dB
Monitor Audio Output
- Audio Frequency Response 40 – 18 kHz, ±3 dB
- Configuration Unbalanced mono, 1/4 in. (will drive stereo phones)
- Impedance 50 Ω
- Maximum Signal Level
(45 kHz max. deviation) - 1 W @ 63 Ω
- Pin Assignments
- Tip: audio +
- Ring: audio +
- Sleeve: ground
Networking
- Power Over Ethernet (PoE) 50 V DC, Class 1
- Network Interface Dual Port Ethernet 10/100
- Network Addressing Capability DHCP or Manual IP address