Mic Bars, Extensions & Holders

This is a mount to attach a KVF.. capsule extensions of the KM 100 system onto a tripod. Especially suited for holding long KVF.. It has a 5/8"-27 thread, plus a thread adapter to connect to 1/2"- and 3/8" stands.

The microphone mount of the SG 289 is made of metal. It has a 5/8"-27 thread, plus a thread adapter to connect to 1/2"- and 3/8" stands. It is designed for U 89 i microphone.

The microphone mount of the SG 287 is made of metal. It has a swivel mount that has a 5/8"-27 thread, plus a thread adapter to connect to 1/2"- and 3/8" stands. It is designed for U 87 i, U 87 Ai or TLM 67 microphone.

The DS 120 has a 150 mm long support bar with two movable 1/2" threaded studs. Two microphones in their mounts can be attached. Any space or angle between the microphones is freely adjustable. The DS 120 has a 5/8"-27 female thread, plus a thread adapter...

The MNV 100 auditorium hanger is used to suspend a detached miniature microphone capsule freely from ist interconnecting cable. The assembly can be rotated and tilted to any desired angle. Suitable for cables with 3 - 3.5 mm diameter. Available in...

The auditorium hanger consists of a cable suspension and a rotating 1/2" threaded stud, to connect to e. g. swivel mounts. The stud is screwed into the threaded coupling of the swivel mount. Then the microphone can be tilted while it is suspended from...

The auditorium hanger consists of a cable suspension and a rotating 1/2" threaded stud, to connect to e. g. swivel mounts. The stud is screwed into the threaded coupling of the swivel mount. Then the microphone can be tilted while it is suspended from...

The auditorium hanger adjusts the tilting angle of a microphone suspended by its own cable. The MNV 21 consists of the tilting clamp, suitable to hold a microphone, and a locking cable strain relief. Suitable for cables with 4-5 mm diameter. Available in...

The Primacoustic VoxGuard is a portable acoustic screen designed to reduce the ambient noise around a microphone when recording. This helps to eliminate excess echo and reverb, allowing the engineer to reintroduce the desired effects during mixing or...

The 4040 SB is a stereo bar designed for proper placement of 4040 Studio Ribbon Microphones.

The 4040 SM is a swivel mount designed for 4040 Studio Ribbon Microphone.

This variable microphone clamp has everything you need. A sophisticated mechanism allows the clamp to be rotated 360°. At the same time the height and position can be varied as required. A supplementary extension tube can be used for an even greater...