Description
The Sennheiser I40-S bundle contains ME35 super-cardioid capsule, MZH3040 gooseneck, MZT30 flange mount and MZS31 shock mount.
ME35 Super-Cardioid Capsule
The ME 35 is a permantly polarized condenser microphone head for use with the Sennheiser MZH goosenecks. This capsule achieves optimum isolation and is suitable for a very wide range of applications including: conference, public address, studio, broadcast, video and others.
Features
- A super cardioid capsule providing a high degree of isolation
- Element based on legendary KE10 capsule, used in Sennheiser's celebrated MKE 40 lavalier and MKE 44P stereo microphones
- All contact points are gold plated and corrosion resistant, insuring maintainence-free long term operation
MZH3040 Gooseneck
The MZH 3040 is a metal gooseneck for use with the ME 34, ME 35 and ME 36 microphone heads. The rugged, matte black gooseneck is fitted with a balanced, floating XLR-3 output, enabling the microphone to be powered from 12 – 48 V phantom power. Length: 400 mm.
Features
- Metal gooseneck
- Length is 400 mm
- Balanced, floating XLR-3 connector with standard polarity
- Matte black finish
MZT30 Flange Mount
The MZT 30 is a flush mount with XLR-3 socket which can be used in combination with the XLR-3 goosenecks MZH 3015, MZH 3040 and MZH 3042.
MZS31 Shock Mount
Shock mount for the MZH goosenecks
Specifications
ME35 Super-Cardioid Capsule
Impedance 50 ÌÎÌà Ì´å©
Dimensions ÌÎÌ_ÌÎ_12 x L18 mm
Frequency response (microphone) 50 Hz - 20 kHz
Transducer principle (Microphone) pre-polarised condenser microphone
Weight approx. 3 oz
Pick-up pattern super-cardioid
Min. terminating impedance 1 kÌÎÌà Ì´å©
Phantom powering P12 - P48
Equivalent noise level 26 dB(A)
Equivalent noise level weighted as per CCIR 468-3 37 dB
Maximum sound pressure level (passive) 130 dB SPL
Current consumption 250 ÌÎÌà _A
Acoustics pressure gradient transducer
MZH3040 Gooseneck
Weight 120 g
Microphone connector XLR 3
Diameter 6 mm
Phantom powering P 12 - P48 V
Goose neck length 400 mm
MZS31 Shock Mount
Overall diameter 74 mm
Overall depth 60 mm
Depth under flange 50 mm
Cut-out hole required 51 mm
ÌÎå«ÌÎ_