Allen & Heath DT164-W 16 XLR Input / 4 XLR Output – 96kHz Dante

(No reviews yet) Write a Review
SKU:
AH-DT164-W
UPC:
6938122249172
Weight:
7.00 LBS
Shipping:
Calculated at Checkout
  • Allen & Heath DT164-W 16 XLR Input / 4 XLR Output – 96kHz Dante
  • Allen & Heath DT164-W 16 XLR Input / 4 XLR Output – 96kHz Dante
  • Allen & Heath DT164-W 16 XLR Input / 4 XLR Output – 96kHz Dante
  • Allen & Heath DT164-W 16 XLR Input / 4 XLR Output – 96kHz Dante
  • Allen & Heath DT164-W 16 XLR Input / 4 XLR Output – 96kHz Dante
  • Allen & Heath DT164-W 16 XLR Input / 4 XLR Output – 96kHz Dante
  • Allen & Heath DT164-W 16 XLR Input / 4 XLR Output – 96kHz Dante
  • Allen & Heath DT164-W 16 XLR Input / 4 XLR Output – 96kHz Dante
$3,399.00

Description

16 XLR Input / 4 XLR Output – 96kHz Dante

The DT164-W provides 16 microphone preamps and 4 line outputs in a versatile wall-mount design for permanent installation. The reversible mounting frame allows for in-wall or on-wall mounting. With custom brackets, the unit can be fitted in a standard NEMA box, or mounted in a floor pocket for stage use. The IEC mains power inlet can be replaced with a gland module and screw terminals for fixed installation, and a DC 12V backup supply is also provided.

DT164-W offers the acclaimed Allen & Heath preamps, complete with 96kHz converters for best-in-class sound quality over Dante, plus Primary and Secondary ports for daisy-chain or redundancy through secure EtherCon connectors.

Up to 16 units can be added to an AMH-64, SQ, Avantis or dLive system when equipped with an SQ Dante or dLive 96kHz Dante card.

Features

  • Dante audio expander, 96kHz / 48kHz
  • Wall mount or dip trap installation
  • 16 mic preamps on XLR with Phantom Power status LEDs
  • 4 XLR Line Outs
  • Primary and Secondary Dante ports with locking EtherCon
  • Redundant or Switched mode
  • Direct preamp control from dLive, Avantis and SQ
  • 3 power supply options: 100-230V AC powered on IEC or screw terminal blocks, as well as 12V DC power
  • DC power can be used as redundant power supply
  • Can fit in a standard NEMA box (custom brackets required)
  • Compatible with ACE Backstage 174SLBK stage pocket system
  • AES67 compatible
  • Dante Domain Manager ready
View AllClose

Specifications

  • Mic/Line XLR Inputs Balanced XLR, +48V phantom power
  • Mic/Line Preamp Fully recallable
  • Input Sensitivity -60 to +15dBu
  • Analogue Gain +5 to +60dB, 1dB steps
  • Pad -20dB Active PAD
  • Maximum Input Level +30dBu (PAD in)
  • Input Impedance >4kΩ (Pad out), >10kΩ (Pad in)
  • Mic EIN -127dB with 150Ω source
  • Analogue XLR Outputs Balanced, Relay protected
  • Output Impedance <75Ω
  • Nominal Output +4dBu = 0dB meter reading
  • Maximum Output Level +22dBu
  • Residual Output Noise
    • -92dBu (muted, 20-20kHz)
    • -90dBu (muted, 20-40kHz)

Dante

  • Sample rate 48kHz or 96kHz
  • Bit Depth 24 Bit
  • Gain, Pad, 48v Control Allen & Heath dLive, Avantis, AHM-64 or SQ system

Operating Temperature Range

  • 0°C to 40°C (32°F to 104°F)

Power

  • Mains Voltage Operating Range 100-240V AC, 50/60Hz
  • Mains Power Consumption 40W max
  • DC Input 12V DC, 3A max

Dimensions and Weight

  • Width x Depth x Height x Weight
  • 210 x 87 x 210 mm x 3.2kg
  • (8.25” x 3.5” x 8.25” x 7lbs)
View AllClose

0 Reviews

View AllClose