Description
96kHz Modular Expander w/Full Redundancy Option
The DX32 Expander adds remote, modular I/O to a dLive, AHM-64, Avantis or SQ system. It provides 4x 8 channel slots to fit a selection of analogue or digital I/O.
The DX32 connects via a single Cat5e cable to the dLive Surface, MixRack, SQ SLink port, Avantis SLink port, AHM-64 SLink port or DX Hub via a secure etherCON port. Two cables can be used for redundant connection to compatible dLive hardware.
With dLive
Up to 2 DX32 Expanders can be connected directly to a dLive MixRack, and a further DX32 can be connected to the Surface. More units can be added to a dLive system via a DX Link card or DX Hub.
With Avantis
A single DX32 can connect directly to an Avantis SLink port. Up to 8 DX32s can be added to an Avantis system via DX Hub and/or DX Link cards.
With SQ
A single DX32 can connect directly to an SQ SLink port. Up to 4 units can be added to an SQ system via a DX Hub.
With AHM-64
A single DX32 can connect directly to an AHM-64 SLink port. Up to 4 units can be added to an AHM-64 system via a DX Hub.
Features
- 4x 8ch modular design
- Redundant, hot swappable power supply
- Dual redundant Cat5 link to Surface or MixRack
- Rack-mounted or shelf / floor operation
- 3 Year Warranty
Available I/O Modules
- PRIME Input - Next-generation 8-input preamp design with DC coupled gain stage. Features 32-bit / 96kHz ADC for class-leading conversion.
- PRIME Output - Next-generation D-A 8-channel output card design using the very latest 32-bit converters and specially selected op amps for ultra-low noise.
- M-AIN - 8 recallable preamps with XLR connectors for balanced or unbalanced microphone and line level signals. Gain, Pad and 48V are digitally controlled within the preamp.
- M-AOUT - 8 line level, balanced XLR outputs. The outputs are relay protected to prevent power on or off thumps.
- M-DIN - 4x stereo AES3 inputs on XLR with SRC (32kHz – 192kHz sampling rate). Sample Rate Conversion can be bypassed for 96kHz operation.
- M-DOUT - 4x stereo AES3 outputs on XLR (44.1kHz, 48kHz, 88.2kHz or 96kHz switchable).
Specifications
Inputs
- Mic/Line XLR Inputs Balanced XLR, +48V phantom power
- Mic/Line Preamp Fully recallable
- Input Sensitivity -60 to +15dBu
- Analogue Gain +5 to +60dB, 1dB steps
- Pad -20dB Active PAD
- Maximum Input Level +30dBu (PAD in)
- Input Impedance >4kΩ (Pad out), >10kΩ (Pad in)
- Mic EIN -127dB with 150Ω source
- Phantom Power Indication: Per socket, internal or external phantom power sensing, triggered at 24V
- Digital Inputs AES3 2 Ch XLR, 2.5Vpp balanced terminated 110 Ω
- SRC on each pair, range 32k - 192kHz, with bypass option
Outputs
- Analogue XLR Outputs Balanced, Relay protected
- Output Impedance <75Ω
- Nominal Output +4dBu = 0dB meter reading
- Maximum Output Level +22dBu
- Residual Output Noise
- -92dBu (muted, 20-20kHz)
- -90dBu (muted, 20-40kHz)
- Digital Outputs AES3 2 Ch XLR, 2.5Vpp balanced terminated 110 Ω
- 96kHz sampling rate, switchable to 48kHz, 44.1kHz
System
- Sampling Rate
- ADC 24-bit Delta-Sigma
- DAC 24-bit Delta-Sigma
- Latency
- + 8 samples, DX32 to Mixrack or DX32 to Surface (DX hop)
- + 5 samples, Surface to Mixrack (GigaACE hop)
- Operating Temperature Range 0 deg C to 35 deg C (32 deg F to 95 deg F)
Power
- Mains Voltage Operating Range 100-240V AC, 50/60Hz
- Mains Power Consumption
- 300W max (MPS16 V1 300W)*
- 250W max (MPS16 V2 250W)*
Note: MPS16 power consumption is printed under AC inlet
Temperature
- Operating Temperature Range
- Fitted with:
- MPS16 V1 300w 0°C to 35°C (32°F to 95°F)
- MPS16 V2 250w 0°C to 40°C (32°F to 104°F)
Dimensions and Weights
- DX32: 433 x 290 x 177 mm x 10.5kg (23lbs)