Description
Designed for use with accordions and other instruments that are difficult to mike, the ATM350S UniMount® mounting system gives you the tools to perform with confidence. The system features the ATM350a cardioid condenser microphone, a high-SPL mic that provides a clear, well-balanced response from any instrument. When teamed with the included AT8491S surface mount and strong, flexible AT8490 5" gooseneck, the mic can be securely fastened to an accordion or other instrument with a challenging mounting surface and be positioned where you want it – the mic will stay in place no matter how much you move the instrument as you play.
The microphone’s cardioid polar pattern isolates the instrument by reducing side and rear pickup, and the switchable 80 Hz high-pass filter on the in-line power module helps control undesired low-frequency noise. The system also includes an AT8468 violin mount with hook-and-loop fastener and a protective carrying case.
Features
- Low-profile mic design for minimum visibility
- Crisp, clear, well-balanced microphone response, even at high SPLs
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- UniMount® surface mount attaches permanently or temporarily to an accordion or other instrument that is difficult to mike, providing excellent shock resistance for the microphone
- Rugged UniMount® 5" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play
- In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise
- Interchangeable elements available for hypercardioid and omnidirectional polar patterns
- Included violin mount with hook-and-loop fastener provides an additional mounting option
Specifications
- Element Fixed-charge back plate, permanently polarized condenser
- Polar Pattern Cardioid
- Frequency Response 40 – 20,000 Hz
- Low Frequency Roll-Off 80 Hz, 12 dB/octave
- Open Circuit Sensitivity –49 dB (3.5 mV) re 1V at 1 Pa
- Impedance 200 ohms
- Maximum Input Sound Level 159 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range (typical) 130 dB, 1 kHz at Max SPL
- Signal-to-noise Ratio 65 dB, 1 kHz at 1 Pa
- Phantom Power Requirements 11– 52V DC, 3.5 mA typical
- Switch Flat, roll-off
- Weight
- Microphone 14.5 g (0.5 oz)
- Power Module 90 g (3.2 oz)
- Dimensions
- Microphone
- 37.8 mm (1.49'') long,
- 12.2 mm (0.48'') maximum body diameter
- Power Module
- 92 mm (3.62") long,
- 18.9 mm (0.74") diameter
- Output Connector (Power Module) Integral 3-pin XLRM-type
- Cable 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with HIROSE HR10-type connector
- Optional Interchangeable Elements
- UE-H hypercardioid (100°)
- UE-O omnidirectional (360°)
- Accessories Furnished
- ATM350a cardioid condenser microphone;
- AT8543 power module;
- AT8491S UniMount® surface mount;
- AT8475 surface mounting kit;
- AT8490 UniMount® 5" gooseneck;
- AT8468 violin mount (hook-and-loop fastener);
- protective carrying case
- Audio-Technica Case Style: M36
