Audix DPQUAD 4-Piece Drum Microphone Set

(No reviews yet) Write a Review
SKU:
DPQUAD
UPC:
687471401149
Weight:
12.50 LBS
Shipping:
Calculated at Checkout
Availability:
Usually ships within 24 hours
  • Audix DPQUAD 4-Piece Drum Microphone Set
  • Audix DPQUAD 4-Piece Drum Microphone Set
  • Audix DPQUAD 4-Piece Drum Microphone Set
  • Audix DPQUAD 4-Piece Drum Microphone Set
  • Audix DPQUAD 4-Piece Drum Microphone Set
  • Audix DPQUAD 4-Piece Drum Microphone Set
  • Audix DPQUAD 4-Piece Drum Microphone Set
  • Audix DPQUAD 4-Piece Drum Microphone Set
$699.00

Description

When it comes to drum and percussion microphones, Audix is the industry leader. These high precision instrument microphones are designed to fill the specific needs of artists and engineers for both studio and live applications.

The Audix DP Series QUAD pack is the simplest and most effective combination of microphones that will allow you to capture the depth and imaging of a full drum kit. With kick, snare and two overheads, the QUAD incorporates the best of two miking techniques: close miking and overhead (ambient) miking.

Close Miking

The D6 for kick drum and the i5 for snare are considered the two microphones every drummer must have. The kick and snare are considered the core of any drum kit and the foundation for every groove. Close miking insures that they will be captured in the mix. If either the kick or the snare is unable to be heard, there is simply no groove. Being high SPL dynamic microphones, the D6 and i5 excel at “close miking”. This miking technique is required in order to capture the attack and percussive sound of the drum. Also, by having the mic close to the source of the sound, it helps to isolate the sound of each drum and separate it from the rest of the kit.  

Overhead (ambient) Miking

Supporting the idea that “less is more”, there are many engineers who will use just two overhead mics to capture the natural sound of the complete drum kit. With two overhead mics, positioned correctly, it is absolutely true that you can capture the transients, tonality and balance of the kit in a completely phase-coherent manner. The ADX51, which is a pre-polarized condenser microphone with a 14mm gold sputtered diaphragm, is designed specifically with overhead applications in mind. Due to its cardioid pickup pattern, high sensitivity and slim pencil design, the two ADX51 mics can be easily positioned overhead to provide a nice stereo image of the entire drum kit.

The Blend

With contemporary music and with the volumes typically generated on stage, it is more practical and effective to create a blended effect of close miking and overhead miking – the exact intent of the DP-QUAD. The D6 will help provide the earthshaking lows and the attack of the kick;  the i5 will reinforce the depth and crack of the snare;  the overheads will pick up the high-hat, tom fills, cymbals and the ambiance of the entire kit. With the DP-QUAD, drums will maintain their sound integrity and critical presence, regardless of the size of the room and PA system.

What's In The Box

  • 1 x Aluminum road case
  • 1 x i5 snare mic
  • 1 x D6 kick mic
  • 2 x ADX51 overhead mics
  • 1 x DVICE rim mount with MC1 mic clip
  • 3 x DCLIP mic clips
  • 2 x WS81C windscreens
View AllClose

Specifications

D6 Kick Drum Microphone 

Transducer Type Dynamic
Frequency Response 30 Hz - 15 kHz
Polar Pattern Cardioid
Output Impedance 200 ohms
Sensitivity 0.8 mV / Pa @ 80 Hz
Capsule Technology VLM Type E
Off Axis Rejection >20 dB
Maximum SPL ≥144 dB
Power Requirements None
Connector Switchcraft® or Audix male XLR connector
Polarity Positive voltage on pin 2 relative to pin 3 of output XLR connector
Housing / Finish Machined Aluminum / Black Hard Coat
Weight 217 g / 7.7 ounces
Length 117 mm / 4.6 inches

i5 Multi-Purpose Instrument Microphone

Transducer Type Dynamic
Frequency Response 50 Hz - 16 kHz
Polar Pattern Cardioid
Output Impedance 150 ohms
Sensitivity 1.5 mV / Pa @ 1k
Capsule Technology VLM Type B
Off Axis Rejection > 23 dB
Maximum SPL ≥ 140 dB
Power Requirements None
Connector Switchcraft® or Audix male XLR connector
Polarity Positive voltage on pin 2 relative to pin 3 of output XLR connector
Housing / Finish Die cast Zinc Alloy / Black E-coat
Weight 183 g / 6.5 ounces
Length 141.5 mm / 5.6 inches

ADX51 Pre-polarized Condenser Microphone

Transducer Type Pre-polarized condenser
Frequency Response 40 Hz - 18 kHz
Polar Pattern Cardioid
Output Impedance 100 ohms
Sensitivity 17 mV / Pa @ 1k
Capsule Technology Black plate electret
Off Axis Rejection >15 dB
Maximum SPL ≥132 dB
Power Requirements 9-52 volts phantom
Connector 3 pin gold plated male XLR connector
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Housing / Finish Brass / Black E-coat
Weight 184 g / 6.5 ounces
Length 160 mm / 6.3 inches

View AllClose

0 Reviews

View AllClose