Description
The Antari DarkFX Strip 510 is an efficient high output low power consumption UV LED bar that delivers a peak wavelength of 365nm and radiant flux output of 4500mW at full intensity with minimum visible light. This ensures all UV reactive materials, art, amusement park displays, and signage reflects perfectly with stunning bright and vivid colors.
It features (6) 1.9W high power UV LEDs, a 25-degree beam angle, special optics to prevent wear degradation from high UV exposure, flicker free operation for TV and FILM, an IP20 rated (indoor use only) aluminum extruded housing, (2) adjustable mounting brackets, and comes with a 22AWG power/data bare wire end pigtail cable attached on the back which connects to the Antari DarkFX Drive 4 fixture driver (sold separately) which is required for power and DMX control.
Features
- High Efficiency UV LED Bar
- 25-Degree Beam Angle
- 365nm Peak Wavelength with Minimum Visible Light
- 4500mW High Output at Full Intensity
- Special Optics to Prevent Wear Degradation from High UV Exposure
- Flicker Free Operation for TV and FILM
Specifications
SOURCE
- (6) 1.9W High Power UV LEDs
- 20,000 Hour Average LED Life*
- *LED Life may vary depending on several factors including but not limited to:
- Environmental Conditions, Power/Voltage, Usage Patterns (On-Off Cycling), Control, and Dimming.
PHOTOMETRIC DATA
- Optics: 25 Degrees
- Peak Wavelength: 365nm
- Radiant Flux Output: 4500 mW
CONTROL/CONNECTIONS
- DarkFX Drive 4 Power/DMX Fixture Driver (sold separately)
- Cable Connection: 22 AWG Bare Wire Power/Data Combo Cable
SIZE / WEIGHT
- Dimensions (no mounting brackets)
- Length: 23.4” (593.2mm)
- Width: 1.78” (45mm)
- Vertical Height: 1.15” (29.15mm)
- Dimensions (including mounting brackets)
- Length: 23.4” (593.2mm)
- Width: 2.91” (74mm)
- Vertical Height: 2.85” (72.35mm)
- Dry Weight: 2.4 lbs. (1.08 kg)
ELECTRICAL / THERMAL
- DC 20-24V
- 12W Max Power Consumption
APPROVALS / RATINGS
- CE | IP20 Indoor Use Only
