JBL ASB6125 High Power Dual 15" Subwoofer

(No reviews yet) Write a Review
UPC:
#N/A
Weight:
87.00 LBS
Shipping:
Calculated at Checkout
Availability:
Usually ships within 24 hours. WRC & WRX options require a special order. Please call for further details.
  • JBL ASB6125 High Power Dual 15" Subwoofer
  • JBL ASB6125 High Power Dual 15" Subwoofer
$3,550.00

Description

High Power Dual 15" Subwoofer

The ASB6125 is a high power, lightweight front-loaded vented subwoofer enclosure housing two JBL 2265H-1 Differential Drive® dual voice coil dual gap 15" woofers. These woofers feature neodymium magnets and ultra robust cones for extra long life.

FEATURES

  • 2 x 2265H-1 15" Differential Drive® dual voice coil dual gap, neodymium magnet transducers
  • 1600 watts continuous pink noise, 6400 watts peak power handling capacity
  • Parallel/Discrete switchable input mode
  • Large vent area for high output with low distortion
  • For ground-stacked or suspended applications in stand-alone arrays or in combination with other AE Series products
View AllClose

Specifications

  • Frequency Range (-10 dB) 32 Hz - 1 kHz
  • Frequency Response (± 3 dB) 38 Hz - 1 kHz
  • Transducer Power Rating 1600 W (6400 W peak), 2 hrs
  • Input Modes Drivers Parallel / Drivers Discrete
  • Long-Term System Power Rating 1350 W (5400 W peak), 100 hrs.
  • Maximum SPL (1m) 35 Hz - 400 Hz: 132 dB-SPL cont avg (138 dB peak)
  • System Sensitivity 35 Hz - 400 Hz: 100 dB-SPL, 1W (2.0V) @ 1m
  • Nominal Impedance
    • 4 ohms in parallel-drive mode
    • 2 x 8 ohms in discrete-drive mode
  • Low Frequency Driver 2 x 2265H-1, 380 mm (15 in) dia., 75 mm (3 in) Dual Coil Dual Gap neodymium Differential Drive® drivers
  • Enclosure Rectangular cabinet, 16 mm (5/8 in) exterior grade 11-ply birch plywood
  • Suspension Attachment 16 points (4 top, 4 bottom, 4 each side), M10 threaded hardware
  • Finish Black DuraFlex™ finish.
    • White available upon request.
  • Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
  • Input Connector NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
  • Environmental Specifications Mil-Std 810; IP-x3 per IEC529.
  • Dimensions (H x W x D in vertical cabinet orientation) 965 x 419 x 597 mm (38.0 x 16.5 x 23.5 in)
  • Net Weight 36.7 kg (81.0 lb)
  • Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers
View AllClose

0 Reviews

View AllClose