Radial Engineering JS3 Discrete 3-Way Passive Mic Splitter

(No reviews yet) Write a Review
SKU:
R800 1023
UPC:
676101034925
Weight:
2.00 LBS
Shipping:
Calculated at Checkout
Availability:
Usually ships within 24 hours
  • Radial Engineering JS3 Discrete 3-Way Passive Mic Splitter
  • Radial Engineering JS3 Discrete 3-Way Passive Mic Splitter
$329.99

Description

Passive 3-way Microphone Splitter

The JS3™ is a high performance balanced mic-level splitter designed to send a signal to multiple destinations simultaneously, with two transformer-isolated outputs and one direct output.

Features

  • Send one microphone signal to three destinations simultaneously
  • Jensen transformer-equipped for exceptional audio quality
  • Eliminates hum and buzz caused by ground loops
  • Dual isolated outputs provide optimal noise rejection

Portable mic splitting on stage or in the studio

The JS3 is a professional mic splitter designed to split a single source to multiple destinations simultaneously without signal degradation or noise. A premium Jensen transformer inside provides galvanic isolation to eliminate buzz and hum from ground loops, while maintaining an extremely wide bandwidth with ultra-low distortion and phase shift. Ground lifts on the outputs help further reduce noise, while an input pad allows line-level sources to connected as well. Both the JS2 and the JS3 can be rack mounted for touring and installation purposes, with up to eight fitting in the Radial J-Rak.

JS3 Applications

  • Using the JS3 to feed three mixers
    • Sometimes, you need to feed the main mixer, stage monitors and a recorder at the same time. The JS3 makes hook-up easy with XLR input, direct out and two isolated outputs. These eliminate ground loops when connecting multiple mixers at the same time.
View AllClose

Specifications

The Radial JS3 mic splitter is a passive device that employs a Jensen transformer to perform the mic bridging and as such, all technical specifications show the isolated output. It is important to note that the JS3 has been optimized for use at mic levels and each device is supplemented with MuMETAL® shielding and a solid steel enclosure to ensure minimal pollution from outside magnetic interference.

  • Audio circuit type: Passive mic/line splitter, transformer based
  • Transformer: JT-MB-DPC, 1:1:1 ratio
  • Number of channels: Three-way splitter (one in/three out)
  • Frequency response: 20Hz ~ 20KHz (+0dB/ -2dB)
  • Dynamic range: 140dB
  • Total harmonic distortion: 0.0005% @ 1kHz
  • Phase Deviation: 0.7° @ 100Hz; 2.8° @ 20Hz
  • Input Impedance: 2.4k Ohms, unbalanced
  • Output Impedance: 2.4k Ohms, unbalanced
  • Maximum Input: +25dBu @ 1kHz

Features

  • Input pad, Ground lift
  • Input Connectors: XLR-F in
  • Output Connectors: Two isolated outputs

General

  • Construction: 14-gauge steel chassis & outer shell
  • Size (L x W x D): 3.3" x 5.0" x 2" (84 x 127 x 48mm)
  • Weight: 1.55lb (0.7kg)
  • Shipping size (L x W x D): 4" x 3" x 6.5" (102 x 76 x 165mm)
  • Shipping weight: 1.92lb (0.87kg)
  • Power: Passive, no power required
  • Conditions: For use in dry locations only between 5°C and 40°C
  • Warranty: Radial 3-year, transferable
View AllClose

Additional Information

WARNING:
Cancer and Reproductive Harm www.P65Warnings.ca.gov
View AllClose

0 Reviews

View AllClose