Description
The sturdy on-table boundary layer microphone MEB 114 constitutes an improvement for any conferencing system. In its –S version it additionally features a programmable microphone button (PTT, PTM, toggle ON/off, permanent on), and a bi-color LED ring for status indication. A camera or media control system can be triggered via the TTL logic out on the bottom side. Thanks to its rugged housing and its high-quality microphone capsule the MEB 114 ensures the best speech intelligibility.
Features
- Microphone modes
- Toggle on/off
- Push to mute
- Push to talk
- permanent on (external LED control)
What's in the box?
- MEB 114 Microphone
- Quickguide
- Cable
Specifications
- Colour black, white, nextel grey
- LED light ring: red / green
- Dimensions 3.34 x 3.93 x 0.98 in (W x D x H)
- Connector clip contact, trigger signal at the logic connector: Logic in (LED control), GND, Logic out (switch signal)
- Frequency response 40 Hz – 20 kHz
- Max. sound pressure level 140 dB
- Transducer principle pre-polarized condenser microphone
- Weight 10.26 oz
- Pick-up pattern cardioid
- Nominal impedance 200 Ω
- Phantom powering P 24 - P 48
- Operating temperature 14 ° to 122 ° F
- Equivalent noise level 29 dB (A)
- Equivalent noise level weighted as per CCIR 468-3 39 dB (CCIR)
- Current consumption 5.3 mA
- Output voltage
- Logic out: High level output voltage > 2.4 V, low level output voltage < 0.4 V
- Logic in: High level input voltage > 2.0 V, Low level input voltage < 0.8 V
- Acoustics boundary layer microphone
- Dynamic range 111 dB (A)
- Sensitivity 10 mV/Pa
