Description
The BLX14/B98 Instrument Wireless System is part of the BLX wireless systems family. Shure BLX Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Precision-built and available in a variety of configurations, it’s the most accessible way to own the stage.
It includes BLX4 single-channel receiver, BLX1 bodypack transmitter, WB98H/C instrument microphone, power supply, 2 AA batteries, carrying case, and user guide.
BLX1 Bodypack Transmitter
The durable BLX1 features a lightweight, ergonomic design and adjustable gain control. For use with BLX Wireless Systems. It supports up to 14 hours of continuous use with 2 AA batteries. 300 ft (100 m) transmission radius.
Features
- Quick and easy receiver frequency matching
- TQG connection for use with Shure lavalier, headset, earset and instrument microphones and guitar cables
- Easily accessible On / Off switch
BLX4 Single Channel Receiver
This is single channel wireless receiver with microprocessor-controlled internal antenna diversity. The durable BLX4 features simple setup, intuitive controls, and microprocessor-controlled internal antenna diversity. One-touch QuickScan frequency selection quickly locates the best open frequency in case of interference. For use with BLX Wireless Systems.
Features
- XLR and ¼" output connectors
- Two-color audio status indicator LED
- Green: Normal audio levels
- Red: Excessive audio levels (overload / clipping)
WB98H/C Instrument Microphone
The WB98H/C is premium wireless cardioid condenser instrument microphones that clamp onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the mic to be easily positioned and secured, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.
Features
- The WB98 H/C feature transformerless preamplifier circuitry which improves linearity across the full frequency range
- The pickup pattern provides high gain-before-feedback and excellent rejection of unwanted noise
- Its high maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments
- The WB98H/C features a 1.6 m (5.3ft) high-flex cable terminating in a 4-pin mini-connector, for use with wireless bodypack transmitters
- Tailored frequency response for open, natural sound reproduction
- Compact, lightweight construction provides a low degree of visibility
- Gooseneck, ratcheting swivel joint and gooseneck angle brace allow for optimum placement and fixed positioning
- Legendary Shure ruggedness and reliability
Specifications
Overall System Specifications
- Operating Range: 300 ft (91 m) line of sight
(actual range depends on RF signal absorption, reflection and interference) - Available Frequencies: Between 524 – 865 MHz
(available frequencies depend on applicable regulations in country where system used) - Audio Range: 50 – 15,000 Hz
(dependent on microphone type) - Transmitter RF Output Power: 10 mW, typical (varies by region)
- Audio Output Connector: XLR and 1/4" (6.3 mm) unbalanced
- Maximum Output Level: -27 dBV (XLR, mic level), -13 dBV (1/4")
- Battery Life: Up to 14 hours
- Dynamic Range: 100 dB A-weighted
- System Distortion: 0.5% THD typical
(ref. +/- 38 kHz deviation, 1 kHz tone) - Operating Temperature Range: -18°C (0°F) – +50°C (122°F)
- BLX4 Power Requirements: 12 – 18 V DC at 150 mA, supplied by external power supply
BLX1 Bodypack Transmitter
- Audio Input Level
- Gain max -16 dBV maximum; min (0 dB) +10 dBV maximum
- Gain Adjustment Range 26 dB
- Input Impedance 1 MΩ
- RF Transmitter Output 10 mW, typical (varies by region)
- Dimensions 110 mm x 64 mm x 21 mm (H x W x D)
- Weight 75 g (2.6 oz.), without batteries
- Housing Molded ABS
- Power Requirements 2 LR6 AA batteries, 1.5 V, alkaline
- Battery Life up to 14 hours (alkaline)
BLX4 Single Channel Receiver
- Output Impedance
- XLR connector 200 Ω
- 6.35 mm (1/4") connector 50 Ω
- Audio Output Level
Ref. ±33 kHz deviation with 1 kHz tone - XLR connector –27 dBV (into 100 kΩ load)
- 6.35 mm (1/4") connector –13 dBV (into 100 kΩ load)
- RF Sensitivity -105 dBm for 12 dB SINAD, typical
- Image Rejection >50 dB, typical
- Dimensions 40 mm X 188 mm X 103 mm (H x W x D)
- Weight 241 g (8.5 oz.)
- Housing Molded ABS
- Power Requirements 12–15 V DC @ 160 mA (BLX88, 320 mA), supplied by external power supply (tip positive)
WB98H/C Instrument Microphone
- Type Condenser (electret bias)
- Polar Pattern Unidirectional (cardioid)
- Frequency Response 20 to 20,000 Hz
- Output Impedance 1200 Ω
- Output Level (0 dB = 1 volt per Pascal) Open Circuit Voltage: –56.5 dB (1.5 mV)
- Output Clipping Level (at 1kHz, THD < 1%) -9 dBV (0.35 V)
- Maximum SPL 143.5 dB
- Dynamic Range (maximum SPL to A-weighted noise level) 112.5 dB
- Output Noise (equivalent SPL) 31 dB typical, A-weighted
- Signal-to-noise ratio 63 dB at 94 dB SPL (IEC 651)
- Polarity Positive pressure on microphone diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground)
- Recommended Operating Voltage 5 V (pin 2 to pins 3 and 4)
- Environmental Conditions
- Operating temperatures –7° C to 49° C (20° F to 120° F)
- Storage temperatures –29° C to +74° C (–20° F to 165° F)
- Relative Humidity 0 to 95%
- Net Weight Microphone w/cable and mini-connector (TA4F): 65 g (2.3 oz.)
