Description
Phonitor 3
The headphone amplifier and monitoring controller with 120V technology Phonitor 3 is the ultimate headphone amplifier and monitoring controller with 120V technology.
It offers the same monitoring quality as the big SPL mastering consoles – on loudspeakers and headphones.
The analog Phonitor Matrix allows mixing and mastering on headphones in the highest quality – with the same spatial perception of the stereo stage as on loudspeakers.
Three analog XLR stereo inputs for various sources and a wide range of monitoring options make it the perfect monitor controller for demanding producers and mixing/mastering engineers.
Phonitor 3 can be equipped with the optional Expansion Rack, which is not only a 19″ rack housing, but it also expands the connection possibilities with three additional switchable stereo outputs for active loudspeakers or power amplifiers.
Specifications
Analog inputs & outputs: XLR (balanced)
- Maximum input & output gain 32.5 dBu
- Input impedance (XLR) 20 kΩ
- Output impedance (XLR) 75 Ω
- Common mode rejection ratio (XLR) -82 dB
- Frequency range (0 dBu) 10 Hz – 100 kHz
- THD +N (1 kHz, 0 dBu) 0.0009 %
- Noise (A-weighted) -102 dBu
- Crosstalk (1 kHz) -95 dB
- Dynamic range 134.3 dB
Standard Headphones Output: 6.35 mm (1/4") TRS Jack
- Wiring Tip = Left, Ring = Right, Sleeve = GND
- Source impedance 0.18 Ω
- Damping factor (40 Ω) 180
- Frequency range (0 dBu) 10 Hz – 100 kHz
- Crosstalk (1 kHz, 0 dBu) -91 dB
- THD + N (1 kHz, 0 dBu) 0.0003 %
- Noise (A-weighted) -102 dBu
- Output power (1 kHz, 1% THD, 250 Ω) 2 x 5 W
- Output power (1 kHz, 1% THD, 32 Ω) 2 x 1 W
- Dynamic range 134.5 dB
Internal Linear Power Supply with Shielded Toroidal Transformer
- Operating voltage for analog audio +/- 60 V
- Operating voltage for relays and LEDs +12 V
Mains Power Supply
- Mains voltage (selectable, see fuse chamber) 230 V AC / 50; 115 V AC / 60 Hz
- Fuse for 230 V T 0.5 A
- Fuse for 115 V T 1 A
- Power consumption max. 40 VA
Dimensions & Weight
- W x H x D (width x height incl. feet x depth) 278 x 100 x 300 mm / 11 x 4 x 11.81 inch
- Unit weight 4.9 kg / 10.8 lbs
- Shipping weight (incl. packaging) 5.6 kg / 12.5 lbs
