Description
CX310 2way/3way Crossover
Designed for Live PA and fixed-installation applications, the model CX310 is a precision Two-Way Stereo / 3-Way mono analog crossover network. 24dB/octave state-variable, fourth-order, Linkwitz-Riley filters. Fourth-order Linkwitz-Riley filters guarantee in-phase outputs at all frequencies which is mandatory for the proper acoustic summing of common signals from adjacent drivers in the crossover region.
Each channel features input level, high and low output level and crossover frequency rotary controls. A frequency "x10" switch is provided for varying the crossover frequency from the standard 80Hz - 920Hz to 800Hz - 9200Hz. Front panel output mute switches are provided for each individual output to ease system setup. The rear panel features XLR and active balanced 1/4-inch TRS input and output connectors as well as a two-way / three-way mode selector switch.
Housed in a rugged all-steel chassis, the model CX310 will provide years of continuous reliable performance.
Features
- Stereo Two-Way or Mono Three-way Configurations
- Fourth-Order Linkwitz-Riley Filters
- Active Balanced XLR and 1/4" TRS Input and Output Connectors
- Individual Output Muting Switches
- x10 Frequency Range Adjusting Switch
- Clipping Indicators on all Outputs
- Designed for Years of continuous, reliable performance
- Rugged all-steel Construction
Specifications
Input Connections: XLR, 1/4” TRS, balanced
Output Connections: XLR, 1/4” TRS, balanced
Frequency Response: 10Hz to 20kHz, +0/-1.5dB
Crossover Frequency Range:
- x1: 80Hz to 920Hz
- x10: 800Hz to 9.2kHz
Crossover Filter Type: Fourth-order Linkwitz-Riley, 24dB/octave
Dynamic Range: 118dB
Signal to Noise Ratio: >85dB
Input Impedance: 20k Ohms
Output Impedance: 150 Ohms
Maximum Input Level: +13dBu
Maximum Output Level: +21dBu
Total Harmonic Distortion (THD): <0.05% (20Hz-20kHz)
Maximum Gain: +4dB
Power Requirements: 105-120V AC, 50-60hz, 3VA (USA)
Export units configured for country of destination
Dimensions (HWD): 1.75” x 19” x 6.5” / 44mm x 483mm x 165mm
Weight: 7.1 lbs. (3.2 kg)
ART maintains a policy of constant product improvement. ART reserves the right to make changes in design or make additions or improvements to this product without any obligation to install these changes on products previously manufactured. Therefore, specifications are subject to change without notice.
