Description
The AT4041SP Studio Pack offers two AT4041 studio condenser microphones. Engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound, the AT4041 features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability. The element back plate holds a fixed charge and has been aged to provide energy stabilization. The surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion.
AT4041SP Studio Pack includes:
Two AT4041 cardioid condenser microphones
Two AT8405a stand clamps
Two AT8159 windscreens
Protective wooden storage case.
Features:
- Smooth, extended frequency response with a slight rise occurring in the high-frequency region
- Ideal for drum overheads, acoustic guitar, piano, horns and under snare
- Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
- Switchable hi-pass filter and rugged turned-brass microphone housing
Specifications
| ELEMENT | Fixed-charge back plate, permanently polarized condenser |
| POLAR PATTERN | Cardioid |
| FREQUENCY RESPONSE | 20-20,000 Hz |
| LOW FREQUENCY ROLL-OFF | 80 Hz, 12 dB/octave |
| OPEN CIRCUIT SENSITIVITY | -36 dB (15.8 mV), re 1V at 1 Pa |
| IMPEDANCE | 100 ohms |
| MAXIMUM INPUT SOUND LEVEL | 145 dB SPL, 1 kHz at 1% T.H.D. |
| DYNAMIC RANGE (TYPICAL) | 121 dB, 1 kHz at Max SPL |
| SIGNAL-TO-NOISE RATIO | 70 dB, 1 kHz at 1 Pa |
| PHANTOM POWER REQUIREMENTS | 48V DC, 3.2 mA typical |
| SWITCH | Flat, roll-off |
| WEIGHT | 4.2 oz (120 g) |
| DIMENSIONS | 6.28" (159.5 mm) long,Ì´Ì_ 0.83" (21.0 mm) body diameter |
| OUTPUT CONNECTOR | Integral 3-pin XLRM-type |
| ACCESSORIES FURNISHED | AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; protective carrying case |
| AUDIO-TECHNICA CASE STYLE |
1 Review
-
A really nice pair, shame about the clips.
Very nice condensers in a quality wooden case. My only gripe is the cheap hard plastic clips which come with them, they mark the paint on the mics really easily so I'm throwing them in the bin and using some Beyer ones. Ridiculous that AT skimp on the clips when everything else is such good quality.
Otherwise great, will definitely buy from Lunchbox again.
