Audix MB8450 Miniature Condenser W/ 84-Inch Carbon Fiber Boom

(No reviews yet) Write a Review
SKU:
MB8450
UPC:
687471292006
Weight:
4.00 LBS
Shipping:
Calculated at Checkout
Availability:
Usually ships within 24 hours
  • STANDMB pedestal stand not included with this product.
  • Audix MB8450 Miniature Condenser W/ 84-Inch Carbon Fiber Boom
  • Audix MB8450 Miniature Condenser W/ 84-Inch Carbon Fiber Boom
$679.00

Description

The product contains M1250B miniature condenser microphone with cardioid or hypercardioid polar pattern capsule, 84-inch carbon fiber boom, clutch assembly and cable. Available in black or white finish.

M1250B Miniaturized Condenser Microphone with RFI Immunity

The M1250B condenser microphone has a fully integrated preamp and detachable cable providing immunity from RF interference caused by cell phones and GSM devices. The M1250B is equipped with a cardioid capsule and is available with hypercardioid capsule as well for use in live, studio and broadcast applications. The M1250B is designed to mic acoustic instruments, overhead stages, podiums, conferences and presentations.

Polar Patterns

Cardioid

In general, the cardioid pattern is the most widely used as it offers a good balance between the sound of the instrument or voice within the context of the room or venue. The cardioid pattern is also helpful with resistance to feedback. For acoustic instruments, in general, the working range will depend on the sound pressure levels produced by the instrument. Because of its small size, the M1250B can also be used in hard to reach areas, such as beneath a cymbal. For orchestral instruments, the M1250B may be positioned anywhere from 3 - 12 inches depending on instrument and room acoustics. For speech or singe voice the typical working distance is 8 - 10 inches. For area miking or group vocals the working distance can be between 2 - 3 feet from the sound source.

Hypercardioid

In situations where the volume is loud on stage or there are many open microphones, this pattern is helpful in further isolating the instrument or vocal from the rest of the instruments on stage. The microphone can be worked at ½ the distance of cardioid if necessary.

Features

  • Small, lightweight, low profile
  • Miniaturized integrated preamp circuitry
  • No external power adapter needed
  • 12 mm gold vapor diaphragm
  • Immune to RF interference
  • Extremely low noise, high SPL handling
  • Available with a cardioid or hypercardioid capsule

84-Inch Carbon Fiber Boom

The boom is a carbon fiber rod compatible with any of The Micros™. Lightweight, able to attach to any microphone stand, the MicroBoom(tm), is a problem solver for many hard-to-reach miking applications including choir, live theater and orchestra.

The MicroBoom™ can be used with any of the microphones in The Micros™ series providing a broad selection of pick-up patterns, output levels and frequency responses. A high quality shielded cable is used internally to insure the cleanest audio signal path between the microphone and the bottom of the boom. The stand adapter offers total control over the angle, rotation and position of the carbon fiber rod by way of a flexible metal gooseneck. The MicroBoom™ provides an ultra-clean, professional and elegant appearance on stage while providing exceptional performance and portability.

Features

  • Lighweight, rigid
  • Portable, easy to position
  • Clean, elegant appearance
  • Choice of capsules
  • Exceptional sound quality
  • No external power needed
  • Attaches to any mic stand
  • Can be used horizontally or vertically

What's In The Box

  • 1 x Carbon Fiber Boom (84")
  • 1 x Microphone (M1250B or M1250BHC)
  • 1 x Clutch Assembly
  • 1 x High quality 25' XLRm -mini-XLRf shielded mic cable
  • 1x Windscreen
View AllClose

Specifications

M1250B/M1250BHC

Transducer Type Condenser
Frequency Response 50 Hz - 19 kHz
Polar Pattern Cardioid / Hypercardioid
Output Impedance 150 ohms
Sensitivity Cardioid 10 mV / Pa @ 1k
Sensitivity Hyperardioid 10 mV / Pa @ 1k
Signal/Noise Ratio (A-weighted) 73 dB
Equivalent Noise Level (A-weighted) 21 dB
Maximum SPL @ .5% THD ≥140 dB
Dynamic Range 119 dB
Power Requirements 18 – 52 V
Connector 3 pin mini-XLRm
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Housing / Finish Machined brass / Powder coat
Weight 0.55 oz / 15.6 grams
Length 2.1 inches / 54 mm

84-Inch Carbon Fiber Boom

Material Rod Carbon Fiber
Material  Gooseneck Steel
Connectors Brass
Length of Microboom-84 84” / 2134 mm
Diameter .20” / 7.4 mm
Connectors Bottom: Mini-xlr male
Connectors Top: Mini-xlr female
Weight 4 ounces / 111 grams (without mic or clip)
Finish Black/ White

View AllClose

0 Reviews

View AllClose