Description
32-Channel Bridge between Dante Networks and Pro Tools|HD
RedNet HD32R is a 1U, 32x32 Pro Tools | HD™ interface for any Dante™ audio-over-IP network. Featuring network and power supply redundancy, RedNet HD32R is the ideal choice for integrating your Pro Tools HD system into a Dante networked I/O environment in many critical-path applications, whether in Post Production, Broadcast, Live Sound or the Recording Studio.
A pair of DigiLink mini connectors allows RedNet HD32R to connect directly to any Pro Tools | HD system whether it's Native, HDX or even a legacy TDM system. Multiple RedNet HD32R units can be on the same Pro Tools system up to the maximum I/O channel count of Pro Tools, and Loop Sync I/O allows seamless integration with other Pro Tools interfaces such as HD I/O and Sync HD I/O.
Key Features
- Allows Dante Ethernet-based audio networking products to interoperate fully with Pro Tools|HD & Pro Tools|HDX
- Ethernet and power supply redundancy with auto switchover in case of failure and locking connectors
- Provides the vital link to create an extensive high-quality audio network based on standard Cat 5e or Cat 6 wiring, bringing the latest advances in digital audio networking to Pro Tools|HD
- Cost-effectively increase audio I/O quality and fl exibility with RedNet interfaces
- Permits multiple workstations to access the same interface hardware and I/O
- No changes to Pro Tools workflow required – simple, logical assignment of RedNet I/O to Pro Tools|HD inputs and outputs
- Up to 32 I/O with Pro Tools|HD over single DigiLink connection per RedNet HD32R
- Additional Avid/Digidesign interfaces may be connected to expansion ports
- Upgrade to RedNet interfaces while remaining fully compatible with TDM or AAX-DSP-based plugins and saved sessions
PSU and Ethernet redundancy.
Dual Ethernet ports with locking etherCON connectors are provided, with several operating modes including daisy-chaining and redundancy confirmed by front-panel indicators. Two separate power supplies with fault detection capability are included, with separate power input sockets (with retaining clips) on the rear of the unit. Power state is indicated both remotely and on the front panel. The HD32R features a rugged, roadworthy exterior and high internal build quality. In addition, it offers a compact 1U rack-mount form factor for a full 32 channels of I/O.
Why Dante and RedNet for Pro Tools|HD?
Focusrite’s RedNet was the first to offer IP networked audio interfaces for recording studio, education, live sound and broadcast workflows, combining superb audio interfaces with the tried and tested reliability of the Dante Ethernet-based audio networking system from Audinate. Dante has been in use in the live sound industry for years in the most exacting applications without missing a single sample. Dante networking offers a powerful combination of features that make it ideal for any Pro Tools|HD production environment. Focusrite’s superb DC-coupled mic preamplifiers and precision digital conversion ensure the very highest audio quality I/O, while Dante’s Ethernet-based audio networking technology makes the need for complex, bulky and expensive analogue multi-way cables a thing of the past. Connected to Pro Tools|HD with RedNet HD32R, audio interfaces can be conveniently located anywhere an Ethernet port is available.
Operation
HD32R acts as a 64-channel (32 in/32 out) digital break in/out box, operating in the same way as a standard interface, and supporting a wide range of Pro Tools|HDX and HD cards. Supported Pro Tools systems include Pro Tools|HDX, Pro Tools|HD Native, Pro Tools|HD Native Thunderbolt, and Pro Tools|HD TDM. Up to six HD32R modules can be used with a Pro Tools|HDX system and three with Pro Tools|HD, allowing the maximum channel count for either. Simply connect the HD32R to Pro Tools|HD with standard Mini DigiLink connectors.
HD32R allows the use of the low latency performance of Pro Tools|HD cards in place of a RedNet PCIe card, bringing the full benefits of Dante audio-over IP networking and the RedNet product range to a Pro Tools|HD system. The entire range of Dante-compatible products including the superb RedNet analogue and digital interfaces can then be used with a Pro Tools|HD system, all connected via Ethernet cable.
From complex multi-room systems to single installations Dante and RedNet offer the ability to create a sophisticated and comprehensive high-quality audio production environment around a standard Ethernet network, with HD32R providing the bridge to any Pro Tools|HD system. Assign any available Dante source or destination via HD32R and it appears in Pro Tools exactly as it would with any other Pro Tools-compatible interface, maintaining traditional Pro Tools workflows.
Specifications
DIGITAL PERFORMANCE
- Supported Sample Rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bit
- Clock Sources: Internal, Word Clock, Loop Sync (master or slave) or from Dante Network Master
- External Word Clock Range: Nominal sample rate ±7.5
REAR PANEL CONNECTIVITY
- Primary Port: 1 x Mini DigiLink
- Expansion Port: 1 x Mini DigiLink
- Word Clock Input: 1 x BNC 75O port (switchable termination)
- Word Clock Output: 1 x BNC 75O port
- PSU: 2 x IEC Inputs with retaining clips
- Network: 2 x etherCON NE8FBH-S, also compatible with standard RJ45 connectors
FRONT PANEL INDICATORS
- Primary PSU (A): Green LED. Illuminates when an AC input is applied and all DC outputs are present
- Primary PSU (B): Green LED. Illuminates when an AC input is applied and all DC outputs are present
- Primary Network: Green LED. Indicates that a network connection is present on primary port when in redundant mode
- Secondary Network: Green LED. Indicates that a network connection is present on secondary port when in redundant mode
- Network Locked: Green LED. When unit is network slave, shows valid network lock. When unit is network master
- Sample Rate: Orange LED for each: 44.1 kHz, 48 kHz, x2, x4
- Pull Up/Down: Orange LED. Indicates unit is set to operate on a Dante pull up/down domain
- Signal Indicators: 16 Green LEDs, 8 input/8 output indicators. Illuminate @ -126dBFS
- Clock Source: Orange LED for each: Internal, Word Clock, Loop Sync and DAW Master
NETWORK MODES
- Redundant: Allows unit to connect two independent networks
- Switched: Connects both ports to integrated network switch allowing daisy-chaining of device
DIMENSIONS
- Height: 44.5mm/ 1.75"
- Width: 482.6mm/ 19"
- Depth: 263mm/ 10.35"
- Weight: 3.9kg
POWER
- Power PSU: 2 x Internal, 100-240V, 50/60Hz, consumption 30VA
HEAT PERFORMANCE
- Operating Temperature: Operates at up to an ambient temperature of 50 degrees Celcius
