Description
Available in Black or White, Centraverse Overhead Condenser Microphones offer low-profile, discreet placement with minimum visibility in a variety of settings. An integrated wire aiming hanger allows for optimal placement above choirs and other ensembles. Snap-fit windscreen also included with each microphone.
Featuring Commshield Technology, which guards against unwanted RF interference from portable wireless devices, Centraverse microphones deliver in best-in-class performance and reliability.
Features
- Tailored frequency response ideal for capturing fast transients above choirs and other ensembles
- CommShield Technology that guards against unwanted RF interference from portable wireless devices (smartphones, etc.) and high resistance to intense nearby radio signals
- Superior Shure design and rugged, dependable construction
Specifications
Cartridge Type Electret Condenser
Frequency Response 70–16000 Hz
Polar Pattern Cardioid
Output Impedance 180 ohm
Sensitivity –33 dBV/Pa (22 mV)
(at 1 kHz , open circuit voltage)
Maximum SPL (1 kHz at 1% THD) 120 dB SPL
Signal to Noise Ratio 67 dB
(referenced at 94 dB SPL)
Dynamic Range 93 dB
Self Noise (equivalent SPL, A-weighted, typical) 27 dB SPL
Common Mode Rejection (10 Hz to 100 kHz) >45 dB
Preamplifier Output Clipping Level (1% THD) -7 dBV
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Power Requirements 11–52 V DC, 2.0 mA
Operating Temperature Range -18° C to 57° C (0° F to 135° F)
Relative Humidity 0 to 95%
View AllClose
Frequency Response 70–16000 Hz
Polar Pattern Cardioid
Output Impedance 180 ohm
Sensitivity –33 dBV/Pa (22 mV)
(at 1 kHz , open circuit voltage)
Maximum SPL (1 kHz at 1% THD) 120 dB SPL
Signal to Noise Ratio 67 dB
(referenced at 94 dB SPL)
Dynamic Range 93 dB
Self Noise (equivalent SPL, A-weighted, typical) 27 dB SPL
Common Mode Rejection (10 Hz to 100 kHz) >45 dB
Preamplifier Output Clipping Level (1% THD) -7 dBV
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Power Requirements 11–52 V DC, 2.0 mA
Operating Temperature Range -18° C to 57° C (0° F to 135° F)
Relative Humidity 0 to 95%
